Solinst Model 101 P2 Water Level Meter Functions:

Depth to water in wells, boreholes, standpipes, and tanks

 

​

 

​

​

​

About the Probe:

• The P2 Probe is shielded in design to reduce or eliminate false readings in cascading water. The probe consists of a stainless steel body with a neoprene heat shrink seal. It is not suitable for submergence to any significant depth. Its simple design makes it easy to repair.

• The probes incorporate an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.

​

​

​

 

About the Electronics and Reel:​

• Sensitivity Control Switch Option easily adjusts for false signals from cascading water

• Tape Guide supports the tape and probe at the well head, and protects tape

       from sharp well-casing edges

​​

About the Tape:​​

• Seven stranded stainless steel conductors resist corrosion, provide strength and are non-stretch. They make the tape very easy to repair and splice. The dog-bone design reduces adherence to wet surfaces.

• High quality polyethylene tape that reels smoothly, remains flexible and hangs straight in the well.

• 3/8" Polyethylene Tape comes with heat embossed markings every 1/100 ft. or each millimeter, in lengths up to 1000 ft. (300 m)

 

 

 

​

​

Padded nylon carrying cases are available, for protection

of your water level meter from weather elements!