Solinst Model 101 P7 Water Level Meter
Solinst Model 101 P7 Water Level Meter Functions:
Depth to water in wells, boreholes, standpipes, and tanks
About the Probe:
The P7 Probe is submersible the full length of the tape, therefore, you can measure total well depth in ideal conditions. The sensor at the tip of the probe provides consistent measurements with almost zero displacement. The tape seal plug design allows the probe to be quickly and easily replaced, if required.
The probes incorporate an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.
About the Electronics and Reel:
Sensitivity Control Switch Option easily adjusts for false signals from cascading water
Tape Guide supports the tape and probe at the well head, and protects tape
from sharp well-casing edges
About the Tape:
The tape has a thick dog bone design that prevents adherence to wet surfaces, and allows it to hang straight in application
Each tape conductor contains 13 strands of stainless steel, and 6 strands of copper-coated steel, making the tape non-stretch and high in tensile strength and electrical efficiency
3/8" laser marked PVDF flat tape comes with permanent laser markings every 1/100 ft. or each millimeter, in lengths up to 5000 ft. (1500 m)
Padded nylon carrying cases are available, for protection
of your water level meter from weather elements!
Length 5.38" / Diameter 0.625"
LM2: Feet and tenths: with markings every 1/100 ft.
LM3: Meters and centimeters: with markings every mm
100ft/30m, 200ft/60m, 300ft/100m comes on a small reel.
500ft/150m, 750ft/250m, 1000ft/300m comes on a medium size reel.
1250ft/400m comes on a large reel.
1650ft/500m, 2000ft/600m comes on a X-large reel.