top of page
BOTTOM INLET SCREEN REMOVAL TOOL
BOTTOM INLET SCREEN REMOVAL TOOL
BOTTOM INLET SCREEN REMOVAL TOOL
First 12 Volt Submersible Centrifugal Pump to fit into a 1" ID Well
-
The Storm® 50 can operate under harsh conditions with higher turbidity.
-
The Storm® 50 can run continuously in water without the need for a cool down!
-
The Storm® 50 has a 150 hour motor life!
-
The Storm® 50 has a sleek outside that minimizes well hang-ups.
-
The Storm® 50 is a very reliable and economical pump that provides a great bang for your buck!
The Engineered Plastic 12 volt submersible centrifugal Storm® 50 pump is capable of pumping up to 50 feet from ground level (DTW)* by simply connecting the Storm® 50 to a battery, gas generator, or vehicle. Its reliable design is perfect for continuous sampling and purging of groundwater wells and Low Flow Sampling.
The 12 Volt Storm® 50 is ideal for low flow sampling in conjunction with Proactive Environmental Products Low Flow Sampling Controller (sold separately). Low flow sample all the way down to 40 mLs per minute. To achieve even a lower flow.... simply add the Low Flow Sampling Control Valve (sold separately) in conjunction with the Low Flow Sampling controller to achieve flow rates of 10 mLs per minute or less!
WATT CONSUMPTION (MAX): 60 WATTS (MAX)
DC VOLT RECOMMENDATION: 12-15 DC (direct current) At Source
AMP CONSUMPTION (MAX): 4 AMPS
MEASUREMENTS: LENGTH 24" / DIAMETER: 0.9"
REQUIRED TUBING: 1/4" X 3/8" ID TUBING
SUPPLIED WITH: 60 FEET OF HEAVY DUTY 12 GAUGE WIRE, QUICK DISCONNECT PLUG & BATTERY CLAMPS
PUMP CONSTRUCTION: ABS
IMPELLER CONSTRUCTION: POLY ACETAL (POM)
MOTOR SHAFT CONSTRUCTION: STAINLESS STEEL
WIRE CONSTRUCTION: PVC
SEAL CONSTRUCTION: NITRILE
Item# P-10340
Are You Ready To Save Time and Money?
Pumping Depth in Feet Gallons Per Minute
DTW (Depth To Water) At 13.8 Volts At The Source
3 0.75
10 0.62
20 0.56
25 0.50
30 0.50
40 0.43
50 0.37
55 0.31
Test was conducted with a Power Source at 13.8 volts
Running your vehicle while using this pump
will dramatically increase purge volume
Simplify And Expedite Your Next Sampling Event!
Specifications:
Pump Depths:
-
Lithium/AGM 12 Volt Battery
-
Gas Generator
-
Direct Connect To Vehicle Battery While Idling
How Do I Energize The Storm® 50 Pump?
What Is Included In The Box:
This pump is not engineered to be dedicated in liquid 24 hours a day.
Need Low Flow Sampling
WE HAVE YOU COVERED
PROACTIVE ENVIRONMENTAL PRODUCTS® Low Flow Sampling Controller
(Sold Separately)
The Proactive® Low Flow Sampling Controller is engineered specifically for the Standard Engineered Plastic Pump Line, which includes the Storm® 50, Mini-Typhoon®, Typhoon®, Tempest/Twister®, Mini-Monsoon®, Super Twister®, Tornado®, Supernova® 70, Abyss®, and Abyss Slimline® plastic pumps. With the Low Flow Sampling Controller, the user can precisely control the water discharge with the turn of a knob. The Low Flow Sampling Controller is used to monitor and regulate low flow sampling as low as 40 mLs per minute. Simply connect a battery, gas generator, or vehicle to the pump and stand back for awesome pumping power!
Check out all the great features of the Low Flow Sampling Controller
-
Heavy-duty reinforced plastic weatherproof case
-
Breaker incorporated into controller
-
6-month parts and labor warranty
-
'Ramp Up' control dial
-
7 foot wire lead to battery clamps and 8-foot wire leads to pump connector
-
Heavy-duty reinforced plastic controller
Item# PA-10800
Best Price And Always In Stock
WE HAVE ALL THE PRODUCTS YOU NEED
ONE STOP SHOPPING IS HERE!
We Have Your Filtration Covered
Full Stock Of .45, 1 and 10 Micron
bottom of page