top of page

Item# ALXPERRI-20000-DPH

PROACTIVE ENVIRONMENTAL PRODUCTS®

Alexis²®12 Volt Peristaltic Pump V3.0

With Double Pump Head

Alexis DPH Pump.tif

Battery Clamps

Power Inverter

VMAX 3.3

AMP Charger

Super fast tubing load times; No more stretching and jamming silicon tubing through the pump head and definitely no more fiddling with screws to gain access to the pump head. Located on the side of the rugged Pelican case exterior allowing the user to easily shut the enclosure.

DSC00650.png

Designed for the Field Technician in mind!
The Alexis²® compact peristaltic pump can either run on its self-contained internal 30 amp AGM battery or plug it into a 120-volt electric socket. The Alexis²® only weighs 39 pounds making this peristaltic pump lightweight and extremely durable. The rugged Pelican™ 1430 case enclosure is made of impact and corrosion resistant ABS plastic to withstand demanding work conditions. Incorporating the most accurate and precise variable speed controller for consistent flow rates ensures the technician reliable sample integrity. The Alexis²® peristaltic pump includes a built-in digital display and sealed push buttons to control several unique functions of this diversified peristaltic pump. And always remember ..... Sample Like A Champ! 
​
Constant Voltage Boosting Technology (CVBT)
Proprietary system that boosts a "low voltage battery" to an amazing range of 13.5 volts. That means faster water discharge rates and more consistent pumping rates. Which in turn makes your next groundwater field sampling event a profit center! 
​
Masterflex Easyload® 2 pump head design




 
Long Lasting Internal AGM Battery with Precise Push Button Technology
An amazing 30 Amp AGM rechargeable long-life internal battery! The benefits of a 30 Amp AGM battery means you get extra long sampling runs. How does up to 9 hours of continuous sampling running at a full 100%! Now you will get the job done faster by eliminating the need to carry an external battery for your small peristaltic pumps and always fearing that you may run the battery out during long sampling events (or even worse off forgetting the battery at the office). With the convenient internal battery charger indicator, you will know exactly how much battery power is left with a simple push of a button! Have a power supply? With the AC or 12v DC adapters, you can set up and run your Alexis²® peristaltic pump indefinitely.
 
Super strong - Lightweight Pelican™ 1430 case
The Alexis²® small peristaltic pump utilizes a Pelican™ 1430 case that lends hand to hand durability and weighs only 39 pounds. The rugged Pelican™ case enclosure is made of impact and corrosion resistant ABS plastic to withstand demanding work conditions.
 
Tell Me More LCD Display
Tells you real-time flow control.
That means you will visually see
your current setting on the LCD
screen when retrieving a sample.
 
Push Button Back Flushing
Supplied with a push button reversible flow feature for back-flushing.
​
Low Voltage Disconnect Warning (LVD)
Simply put, the LVD is a "battery saver device". If the internal battery should ever fall below 10.75 volts into the critical "red" level of the "Internal Battery Charger Indicator" area then the Alexis²® will turn off..... In short, the LVD telling you that the internal battery needs a charge. This advanced technology will prolong the life of the internal battery.

Protection From Reverse Polarity
If you should reverse polarity the battery clamps when hooking up the Alexis²® peristaltic pump to an external battery, the built-in internal protection engages not allowing the Alexis pump to turn on.

Specifications:

  • Pump up to 1 Gallon Per Minute and as low as 40 mLs per minute*

  • Suction lift up to 26 feet

  • Supplied with two pump heads

  • AC adapter for 120 volts. For international use, The Alexis²® has the ability to operate on 220 volts direct with correct mini-transformer (Item # CONVERT 220V/110V) Please Note: The International Voltage Converter is sold separately upon request

  • Product Dimensions: Width 21" x Depth 8 1/2" x Height 13 1/2"

  • Weight of Product: 39 Pounds

  • Please Note: Use Masterflex® (MF) or other quality silicone tubing comparable to:

       → MF# LS 15: 3/16"ID X 3/8" OD

       → MF# LS 24: 1/4" ID X 7/16" OD

       → MF# LS 36: 3/8" ID X 5/8" OD

  • For a better and more economical alternative to Masterflex® tubing is Proactives Pseudocone™ Tubing:

       → MGE-1000: 3/16" ID x 3/8" OD

       → MGE-2000: 1/4" ID x 7/16" OD

       → MGE-3000: 3/8" ID x 5/8" OD   

               

 

*The Alexis AC to DC inverter is compatible with 220 volts with the purchase of a 220 volt to 120 volt AC

step down transformer. You can purchase this step-down transformer in your country.

 

Masterflex Easyload® 2 pump head is a registered trademark of Thermo Fisher Scientific
* Test conducted with 3 feet of size 36 Masterflex® tubing

 Pumping Depth in Feet      At 13.5 Volts (Flow Rate at 100%)

 DTW (Depth To Water)                 Gallons Per Minute

               

                3                                                 1

             

              10                                                 1

 

              20                                                 1

                

              26                                                 1

 

              30                                               N/A

 

 

Test was conducted with the Alexis built in 30 AMP AGM battery

 

Type A

plug type A.jpg

 •  Mainly used in the USA,

    Canada, Mexico & Japan

 •  2 pins

 •  Not grounded

 •  15 A

 •  Almost always 100–127 V

 •  Socket compatible with           plug type A

Included with

the Int'l Voltage

Converter

Type B

Plug type B.jpg

•  Mainly used in the USA,         Canada, Mexico & Japan 

•  3 pins

•  Grounded

•  15 A

•  Almost always 100–127 V

•  Socket compatible with          plug types A & B

Type C

plug type C.jpg

•  Commonly used in Europe,

    South America & Asia

•  2 pins

•  Not grounded

•  2.5 A

•  Almost always 220–240 V

•  Socket compatible with          plug type C

Type D

plug Type D.jpg

•  Mainly used in India 

•  3 pins

•  Grounded

•  5 A

•  220 – 240 V

•  Socket compatible with          plug type D (partial and        unsafe compatibility with      C, E & F)

Type E

Plug type E.jpg

•  Primarily used in France,       Belgium, Poland, Slovakia

   & Czechia

•  2 pins

•  Grounded

•  16 A

•  220 – 240 V

•  Socket compatible with         plug types C, E & F

Type G

Plug type G.jpg

•  Mainly used in the United

    Kingdom, Ireland, Malta,

    Malaysia & Singapore

•  3 pins

•  Grounded

•  13 A

•  220 – 240 V

•  Socket compatible with         plug type G

Included with

the Int'l Voltage

Converter

Type I

Plug Type I.jpg

•  Mainly used in Australia,       New Zealand, China &           Argentina 

•  2 or 3 pins

•  2 pins: not grounded  

   3 pins: grounded

•  10 A

•  220 – 240 V

•  Socket compatible with          plug type I

Type F

Plug type F.jpg

•  Used almost everywhere        in Europe & Russia, except      for the UK & Ireland 

•  2 pins

•  Grounded

•  16 A

•  220 – 240 V

•  Socket compatible with          plug types C, E & F

Type H

Plug Type H.jpg

•  Used exclusively in Israel,

   the West Bank & the Gaza

   Strip

•  3 pins

•  Grounded

•  16 A

•  220 – 240 V

•  Socket compatible with          plug types C & H (unsafe        compatibility with E & F)

Type J

Plug Type J.jpg

•  Used almost exclusively 

    in Switzerland &         

    Liechtenstein 

•  3 pins

•  Grounded

•  10 A

•  220 – 240 V

•  Socket compatible with         plug types C & J

Type K

Plug Type K.jpg

•  Used almost exclusively          in Denmark & Greenland 

•  3 pins

•  Grounded

•  16 A

•  220 – 240 V

•  Socket compatible with          plug types C & K (unsafe        compatibility with E & F)

Type L

Plug Type L.jpg

•  Used almost exclusively in        Italy & Chile

•  3 pins

•  Grounded

•  10 A & 16 A

•  220 – 240 V

•  10 A socket compatible with      plug types C & L (10                  A version) / 16 A socket            compatible with plug type        L (16 A version)

Included with

the Int'l Voltage

Converter

Included with

the Int'l Voltage

Converter

Type M

Plug Type M.jpg

•  Mainly used in South Africa 

•  3 pins

•  Grounded

•  15 A

•  220 – 240 V

•  Socket compatible with            plug type M

Type N

Plug Type N.jpg

•  Used in Brazil and South       Africa 

•  3 pins

•  Grounded

•  10 A & 20 A

•  100 – 240 V

•  Socket compatible with         plug types C & N

Type O

Plug Type O.jpg

•  Used exclusively in

   Thailand

•  3 pins

•  Grounded

•  16 A

•  220 – 240 V

•  Socket compatible with          plug types C & O (unsafe        compatibility with E & F)

bottom of page