PROACTIVE ENVIRONMENTAL PRODUCTS®
PRO CONTROLLER #1
Free up your time! Free up your mind!
Proactive® Liquid Detection (LD) Sensor Autonomous Pump Control Technology!
Set it and Forget it!
Weatherproof Pro Controller #1 provides variable flow with low flow control and autonomous pump operation with Liquid Detection Sensor (LD) and Tank Float Switch Technologies
Powered by a 12 volt dc battery or 12 volt dc battery bank
The Pro Controller #1 is compatible with a wide range of
Proactive Environmental Products® pumps listed below:
If you plan to power the Proactive® brand pumps listed with other means of energy and/or desire a timer please contact us to discuss the full line of Proactive® Autonomous Pump Control System options for solar, AC/DC transformers, or gas generator.
Applications of the Pro Controller #1: When using the Abyss®, Poseidon® 60 and 80 and
SS Mini Monsoon® XL 60 and 80 series pump lines include, but not limited to:
24/7 stationed applications in groundwater, surface water, vaults or the like for: Pump Tests, Long or Short Term Purge, Low Flow Monitoring, Remediation, Liquid Transfer, Remote Groundwater and Surface Water Monitoring
Applications of the Pro Controller #1: When using the Abyss® and SS Mini Monsoon® XL 60 and 80 series pump lines include, but not limited to:
24/7 stationed applications in groundwater, surface water, vaults or the like for: Pump Tests, Long or Short Term Purge, Low Flow Monitoring, Remediation, Liquid Transfer, Remote Groundwater and Surface Water Monitoring, and Hydrocarbon Recovery [LNAPL/DNAPL]
Applications of the Pro Controller #1: When using the Frontier® 60 and 80 series pump line
24/7 Stationed application for cabin or off-the-grid use
Pro Controller #1 provides flexible product features. If you appreciate options (the good news all options are included with the product), you will be pleased to know you can select from any or all of the Pro Controller #1 features!
Option #1: LD Sensor Detection and Dry Run Detection Feature
The LD sensor detects (conductive) liquid*. The pump will run as long as the LD sensor is suspended in liquid. When liquid draws down below the LD sensor, the dry run sensor takes over, transmitting a signal to the Pro Controller #1 to shut-off the pump. As liquid level rises again covering the LD sensor, the LD sensor takes over and transmits a signal to the Pro Controller #1 to turn-on the pump. This cycle continues automatically.
Option #2: Tank Float Switch Feature
This feature prevents tank over-fill and provides control over the desired total volume of liquid that enters the tank. The tank float switch detects the full-set point (assigned during tank float switch deployment) and transmits a signal to the Pro Controller #1 to shut-off the pump. The pump remains off until the tank reservoir drops triggering the tank float switch to transmit a signal to the Pro Controller #1 to turn-on the pump again. This cycle continues automatically.
Option #3: Variable Flow with Low Flow Control Feature
Incorporating this feature provides the ability to adjust the flow rate for a continual, consistent flow which is ideal for low-yielding wells, vaults or fluctuating water levels in surface water.
Option #4: Incorporate all Pro Controller #1 feature options listed above
Incorporate the LD Sensor Detection and Dry Run Detection, Tank Float Switch and Variable Flow with Low Flow Control Features.
Pro Controller #1
The Ultimate Pump Control With Liquid Detection Sensor Technology
Configure The Pro Controller #1 The Way You Want It!
DRY RUN SENSOR
PUMP CONNECTION WIRES
PRO CONTROLLER #1 WITH LOW FLOW CONTROL
LIQUID DETECTION SENSOR
TANK FLOAT SWITCH
The most economical and simple solution to autonomous pump control
Provides Peace of Mind by managing the pump so you don't have to
Improves time management! Literally set the Pro Controller#1 with pump and
Save money! Eliminate archaic, bulky & expensive equipment
User-friendly install takes roughly 15 minutes to setup
Look like a PRO when your clients see how much money you save them by deploying Proactive® autonomous pump control technology
One time setup
Same pump settings upon restart every on/off cycle or from power outage
Flexibility to choose the options that will get the job done accurately, faster, and under budget
Ideal for off-the-grid projects
Ideal for remote sites without AC power
Lightweight and easy to mount
Runs directly from a 12 volt dc battery or 12 volt dc battery bank
Designed for the outdoors incorporating a weatherproof enclosure
Warranty: Manufacturer 6 months parts and labor warranty
Pro Controller #1 comes with:
Weatherproof enclosure provides long life and protection to the components
Built-in Variable Flow Control with Low Flow Capability
Liquid Detection Sensor and Dry Run Sensor probes come with:
○ 300 feet of wire per sensor spooled onto reel
Tank Float Switch comes with 3 feet of wire (additional wire can be purchased upon request)
Two wire connector nuts