PROACTIVE ENVIRONMENTAL PRODUCTS®
12 Volt Poseidon® 80 Plastic Pump
(Lifts 80 Feet / 24 Meters)
For the Time Efficient, Budget Conscious Environmental Professional!
Streamline ~ Simplify
And above all... Enjoy Your Surface and Groundwater Projects!
Welcome to the Poseidon®Plastic Pump line!
The low amp draw, hardworking Poseidon® 80 Pump fits into 2 inch schedule 40 and 80,
and larger diameter wells. Poseidon® 80 Pump is powered by a 12 volt DC power source such your vehicle. For remote sites consider the Proactive® 60 AMP battery power pack,
or a 12 volt DC portable spill-safe AGM battery.
The Poseidon® 80 Pump is most popular for its price point, reliability, performance,
ease-of-use, and the flexibility to be used in multiple applications!
The Poseidon® 80 Pump is compatible with several 12 volt DC autonomous pump control systems
options to choose from such as Proactive Environmental Products®:
Pro Controller #1
Applications of the Poseidon® 80 Plastic Pump include, but not limited to:
24/7 stationed applications in groundwater, surface water, vaults or the like for: Pump Tests, Long or Short Term Purge, Remediation, Liquid Transfer, Ongoing Groundwater and Surface Water Monitoring
Note: if you are looking for an affordable Hydrocarbon Recovery [LNAPL/DNAPL] pump please see the
Item# PPOS-8000

Poseidon® 80 Plastic Pump
The most versatile and simple-to-use surface and groundwater 12 volt DC pump on the market!
Explore your options!
Find out why tens of thousands of Poseidon® 80 Pumps
are deployed at ongoing monitoring and groundwater remediation sites globally!
Specifications:
The Poseidon® 80 Pump consists of 4 components: The 4 Pin Bayonet Motor Module Connector, Replaceable Motor Module, Outside PVC Housing with PVC Bottom Inlet Filter Screen (Assembled as One Unit), and the Pump Wire
WATT CONSUMPTION (MAX): 240 WATTS (MAX)
DC VOLT RECOMMENDATION: 12-15 DC (direct current) At Source
AMP CONSUMPTION (MAX): 16 AMPS
BLADE FUSE: 20 AMP FUSE
MEASUREMENTS: LENGTH 7.5" / DIAMETER: 1.82"
REQUIRED TUBING: 3/8" ID X 1/2" OD TUBING
SUPPLIED WITH: 90 FEET OF HEAVY DUTY 10 GAUGE WIRE WITH ALLIGATOR CLAMPS
PUMP CONSTRUCTION: PVC, POLYPROPYLENE, AND STAINLESS STEEL
Manufactured from PFOA Free Parts
This pump is to be used as a dedicated pump only, which means dedicated to the well or dedicated
to the water 24 hours a day! Not to be used as a portable pump
DO NOT cut the Poseidon®80 Pump wire down from manufacturer setting at 90 feet length to avoid motor module damage
Important Notes and Friendly Reminders:
The Poseidon® 80 Plastic Pump cannot be used as a pressure pump under any circumstance. The Poseidon® 80 Plastic Pump is engineered to discharge liquid into a holding tank, not to be used in a pressurized tank application.
Do not restrict the Poseidon® 80 Pump using valves or any other flow restriction mechanical devises! If you need to achieve a lower discharge rate, consider acquiring the Pro Controller #1 featured on the right side of this page.
Poseidon® 80
Can be used with one of the following:
OPTIONAL:
ACCESSORIES:
Pumping Depth in Feet Gallons Per Minute
DTW (Depth To Water) At 12.5 Volts At The Source
10 DON’T USE
20 DON’T USE
30 DON’T USE
40 2.00 GPM
50 1.75 GPM
60 1.40 GPM
70 1.25 GPM
80 1.00 GPM
90 END OF WIRE