top of page
BOTTOM INLET SCREEN REMOVAL TOOL
BOTTOM INLET SCREEN REMOVAL TOOL
BOTTOM INLET SCREEN REMOVAL TOOL
Item# P-10380
PROACTIVE ENVIRONMENTAL PRODUCTS®
12 Volt Abyss® Plastic Pump
(Lifts 220 Feet / 67 Meters DTW)
(For 4" schedule 40 well or larger)
The Engineered Plastic 12 volt Abyss® pump is capable of pumping up to 220 feet depth to water (DTW)* by simply connecting the Abyss® to a 12 volt deep cycle battery. Its reliable design and low amp consumption makes it the ideal pump for remediation pump and treat system. The Abyss pump can run continuous, 24 hours a day, 7 days a week for remote situations when the pump needs to run when no technician is present. The Engineered Plastic Abyss® can even be used for low flow sampling (Fractional Flow®). Now you can sample all the way down to 40 mLs per minute with the Low Flow Sampling Controller. Need to get even lower?? How about 10 mLs per minute in conjunction with the Low Flow Sampling Control Valve.
Simplify and Expedite Your Next Sampling Event!
-
The Abyss® can operate under harsher conditions with higher turbidity. It can even run in oily, sandy liquid.
-
The Abyss can run continuously 24 hours a day, 7 days a week. It can even run dry 24 hours a day, 7 days a week!!
-
The Abyss® has a 3,000-hour motor life!
-
The Abyss® has a sleek outside that minimizes well hang-ups that easily fits into 4-inch wells or larger.
-
The Abyss® is widely used as a remediation pump for groundwater pump and treat situations.
-
The Abyss® is a very reliable and economical pump that provides a great bang for your buck!
The Abyss® is simple to make it a solar pump! Simply hook up your desired solar panel arrangement to the 80 Amp Solar Charger and then to a deep cycle marine battery(ies) for a turnkey solar pumping system that will last for years and years!
The Abyss® can also be hooked up to Proactive Environmental Products Weatherproof 110/220 Volt Step Down Transformer which can turn any high voltage situation into a safe low voltage pump.
The Abyss® can also run off the 50 amp gas powered 12 Volt Crusader®. This Gas driven Generator can produce 50 continuous amps of 12-volt power. No batteries are needed!
* Depth to water
What is included in the box:
Specifications: When Using The Low Flow Sampling Controller, Pro Solar Charger #1, Pro Transformer #1, Pro Transformer #2, Pro Transformer #3 Or The Pro Controller #1
WATT CONSUMPTION (MAX): 60 WATTS (MAX)
DC VOLT RECOMMENDATION: 12-15 DC (direct current) At Source
AMP CONSUMPTION (MAX): 4 AMPS
MEASUREMENTS: LENGTH 12"/ DIAMETER: 3.83"
REQUIRED TUBING: 3/8" ID or 1/2" ID TUBING
SUPPLIED WITH: 230 FEET OF HEAVY DUTY 10 GAUGE WIRE, QUICK DISCONNECT PLUG & BATTERY CLAMPS
SEAL AND VALVE CONSTRUCTION: VITON (IS STANDARD UNLESS REQUESTED OTHERWISE)
Specifications: When Using The Abyss Solar Direct with LD and Float Switch
WATT CONSUMPTION (MAX): 75 WATTS (MAX)
DC VOLT RECOMMENDATION: 12-15 DC (direct current) At Source
AMP CONSUMPTION (MAX): 5 AMPS
MEASUREMENTS: LENGTH 12"/ DIAMETER: 3.83"
REQUIRED TUBING: 3/8" ID or 1/2" ID TUBING
SUPPLIED WITH: 230 FEET OF HEAVY DUTY 10 GAUGE WIRE, QUICK DISCONNECT PLUG & BATTERY CLAMPS
SEAL AND VALVE CONSTRUCTION: VITON (IS STANDARD UNLESS REQUESTED OTHERWISE)
Specifications: When Using The Abyss Transformer #4 Or The Abyss Solar Charger #1
WATT CONSUMPTION (MAX): 75 WATTS (MAX)
DC VOLT RECOMMENDATION: 12-15 DC (direct current) At Source
AMP CONSUMPTION (MAX): 5 AMPS
MEASUREMENTS: LENGTH 12"/ DIAMETER: 3.83"
REQUIRED TUBING: 3/8" ID or 1/2" ID TUBING
SUPPLIED WITH: 230 FEET OF HEAVY DUTY 10 GAUGE WIRE, QUICK DISCONNECT PLUG & BATTERY CLAMPS
SEAL AND VALVE CONSTRUCTION: VITON (IS STANDARD UNLESS REQUESTED OTHERWISE)
Specifications: When Using The Abyss Booster #1 Or Abyss LD With Booster
WATT CONSUMPTION (MAX): 193.5 WATTS (MAX)
DC VOLT RECOMMENDATION: 12-15 DC (direct current) At Source
AMP CONSUMPTION (MAX): 12.9 AMPS
MEASUREMENTS: LENGTH 12"/ DIAMETER: 3.83"
REQUIRED TUBING: 3/8" ID or 1/2" ID TUBING
SUPPLIED WITH: 230 FEET OF HEAVY DUTY 10 GAUGE WIRE, QUICK DISCONNECT PLUG & BATTERY CLAMPS
SEAL AND VALVE CONSTRUCTION: VITON (IS STANDARD UNLESS REQUESTED OTHERWISE)
Abyss® Plastic Pump
can be used with the following products:
ACCESSORIES:
When Used With: Low Flow Sampling Controller, Pro Solar Charger #1, Pro Transformer #1, Pro Transformer #2, Pro Transformer #3 Or Pro Controller #1
Pumping Depth in Feet Gallons Per Minute
DTW (Depth To Water)
10 1.15
20 1.00
40 1.00
60 0.85
80 0.85
100 0.80
120 0.80
140 0.75
160 0.75
180 0.70
200 0.70
220 0.50
230 END OF WIRE
Pump test was conducted with a Power Source at 13.8 volts
Running your vehicle while using this pump
will dramatically increase purge volume
When Used With:
Abyss Booster #1 Or Abyss LD With Booster
Pumping Depth in Feet Gallons Per Minute With
DTW (Depth To Water) Abyss Booster Products
10 2.30
20 2.00
40 1.75
60 1.65
80 1.65
100 1.50
120 1.50
140 1.40
160 1.40
180 1.25
200 1.25
220 1.00
230 END OF WIRE
Pump test was conducted with a Power Source at 13.8 volts
Running your vehicle while using this pump will dramatically increase purge volume
When Used With: Abyss Transformer #4 Or Abyss Solar Charger #1
Pumping Depth in Feet Gallons Per Minute
DTW (Depth To Water)
10 2.30
20 2.00
40 1.75
60 1.65
80 1.65
100 1.50
120 1.50
140 1.40
160 1.40
180 1.25
200 1.25
220 1.00
230 END OF WIRE
Pump test was conducted with a Power Source at 13.8 volts
When Used With:
Abyss Solar Direct with LD and Float Switch
Pumping Depth in Feet Gallons Per Minute With
DTW (Depth To Water) Abyss Solar Direct Products
10 2.30
20 2.00
40 1.75
60 1.65
80 1.65
100 1.50
120 1.50
140 1.40
160 1.40
180 1.25
200 1.25
220 1.00
230 END OF WIRE
Pump test was conducted on a cloudless sunny day using a single 245watt Hanwha solar panel that produced 30 volts (VMP) consistent with pump AMP draw of 8.64 per hour
bottom of page